Korg Microkorg XL User Manual page 77

KEY SYNC (LFO KeySync) ............................................................[OFF, ON]
Specifies whether the LFO will be reset by note-on.
p. 67 "KEY SYNC (LFO KeySync)"
INI.PHASE (LFO Init Phase) ...................................................[000...180°]
Sets the starting location of the waveform.
This parameter will be displayed and can be set if "KEY SYNC" is ON.
NOTE
p. 67 "INI.PHASE (LFO Init Phase)"
LFO SPRD (LFO Spread)....................................................[–180...+180°]
Sets the LFO phase difference between the left and right channels.
HI DAMP ........................................................................... [000...100%]
Sets the feedback damping amount in the high range.
15. TREMOLO (Stereo Tremolo)
This effect modulates the volume level of the input signal. The effect is ste-
reo, and offsetting the LFO of the left and right phases from each other pro-
duces a tremolo effect between left and right.
Stereo In - Stereo Out
Left
Right
LFO LFO Shape
DRY/WET ......................................................["DRY", 99:1...1:99, "WET"]
Sets the balance between the effect and dry sounds.
MOD.DEPTH (Modulation Depth)
Sets the depth of LFO modulation.
Dry / Wet
Tremolo
Tremolo
Dry / Wet
LFO Spread
.......................................[000...127]
LFO SYNC (LFO Tempo Sync) .......................................................[OFF, ON]
Specifies whether the LFO cycle will be synchronized with the tempo speci-
fied by the [TEMPO] knob or MIDI clock.
p. 66 "LFO SYNC (LFO Tempo Sync)"
LFO FREQ (LFO Frequency) ......................................... [0.01...100.0Hz]
Sets the LFO speed.
p. 66 "LFO FREQ (LFO Frequency)"
SYNC.NOTE (LFO Sync Note) ..............................................[8/1...1/64]
Sets the LFO frequency as a proportion of the tempo set by the [TEMPO]
knob.
This parameter will be displayed and can be set if "LFO SYNC" is ON.
NOTE
p. 66 "SYNC.NOTE (LFO Sync Note)"
LFO WAVE (LFO Waveform)................ [SAW, SQUARE, TRIANGLE, SINE, S&H]
Selects the LFO waveform.
p. 66 "LFO WAVE (LFO Waveform)"
LFO.SHAPE ......................................................................... [–63...+63]
p. 66 "LFO.SHAPE"
KEY SYNC (LFO KeySync).............................................................[OFF, ON]
Specifies whether the LFO will be reset by note-on.
p. 67 "KEY SYNC (LFO KeySync)"
INI.PHASE (LFO Init Phase) .................................................. [000...180°]
Sets the starting location of the waveform.
This parameter will be displayed and can be set if "KEY SYNC" is ON.
NOTE
p. 67 "INI.PHASE (LFO Init Phase)"
LFO SPRD (LFO Spread)....................................................[–180...+180°]
Sets the LFO phase difference between the left and right channels.
16. RING MOD (Stereo Ring Modulator)
This effect creates a metallic sound by applying the oscillators to the input
signal. Use the LFO or Dynamic Modulation to modulate the oscillator to
create a radical modulation. Matching the oscillator frequency with a note
number will produce a ring modulation effect in specific key ranges.
Effect guide
77