Reducing Camera Shake - JVC Everio GZ-HM860 User Manual

Recording

Reducing Camera Shake

When the image stabilizer is set, camera shake during recording can be
effectively reduced.
1 Open the LCD monitor and select the video mode.
.
2 Tap "MENU".
.
3 Tap "DIS" (image stabilizer).
.
Tap ∧ or ∨ to move upward or downward for more selection.
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
0
Tap the desired setting.
4
.
Setting
Deactivates image stabilizer.
b OFF
Reduces camera shake under normal shooting
a ON
conditions.
Reduces camera shake more effectively when
c ON (AIS)
shooting bright scenes on the wide angle end.
Only on the wide angle end (approx. 5x).
64
Details
Setting the Enhanced AIS Mode
The area of correction in the enhanced AIS mode is greater than that in the
AIS mode. Camera shake can be reduced more effectively even when
recording is performed by zooming from wide angle to telephoto, or moving
together with the subject.
Set the enhanced AIS mode as follows.
A Assign "DIS" to the USER button.
"Setting the USER Button" (A p. 71)
B Press and hold the USER button.
The Enhanced AIS mode is set and s is displayed. The mode is
0
canceled when the button is released.
To perform recording in the Enhanced AIS mode, press the record button
while holding the USER button. The mode is canceled when recording is
stopped.
Memo :
It is recommended to set the image stabilizer to "OFF" when shooting a
0
subject of little movement with the unit on a tripod.
Complete stabilization may not be possible if camera shake is excessive.
0
This setting is effective for video recording only.
0