Listening To The Fm Radio; Setting Preset Channels - IRiver H320 Instruction Manual

Listening to the FM radio

Listening to the FM radio
Press and hold the
display the menu of player models.
Use the buttons to select the Radio icon then press the
open the radio screen.
Press the buttons to select a channel.
Press and hold the buttons to search for
channels automatically. When a frequency is
found, the radio will stay on that station until
or is pressed again.
[Note]
Press the button to switch between Stereo / Mono.
In areas where the signal is weak, some channels may be unavailable, or reception
may be poor.
Searching for a FM radio frequency
Manual Search
Press the buttons in the radio screen to change frequency by 0.1
MHz. Keep pressing the button until the desired channel is found.
42
button to
button to
Auto Scan
Press and hold the buttons to search
for an available channel automatically.
Hold the button until the desired channel is
scanned.
[Note]
The AUTO SCAN and AUTO MEMORY functions do not work while
Preset is ON.
In manual search, using the
0.1MHz in Korea /U.S.A/Japan, and 0.05 MHz in Europe.

Setting preset channels

Manual Preset
Use the button in the radio screen to set the Preset OFF.
Use the buttons to select the desired
channel then press the button to display
the channel number.
Press the buttons to select the desired channel number. Press the
button to set it. The number of preset channels are displayed as in the
'TOTAL XXCHs'. Press the button to cancel the saving. A Maximum
of 20 channels can be set.
FM Tunner
KOREA
STEREO
95.8 95.8
CH 02
87.5 108
Searching
Preset OFF TOTAL 13CHs
buttons changes the frequency by
FM Tunner
KOREA
STEREO
95.8
95.8
CH 02
87.5 108
Memory
Preset OFF TOTAL 13CHs
43