Connections; Cautions Before Connecting; Connect A Vcr - Insignia IS-LCDTV32 User Manual

IS-LCDTV32.fm Page 7 Friday, May 20, 2005 11:57 AM
IS-LCDTV32 32-inch Color TV

Connections

Cautions Before Connecting

• Carefully check the terminals for position and
type before making any connections.
• The illustration of the external equipment
may be different depending on your model.
• Loose connectors can result in image or color
problems. Make sure that all connectors are
securely inserted into their terminals.
• Refer to the operating manual of the external
device as well.
• When connecting an external device, turn the
power off on the panel to avoid any issues.
AVI INPUT/
S-VIDEO IN
Yellow (VIDEO)
White (AUDIO L)
W
Red (AUDIO R)
AUDIO R
AV OUT
AUDIO L
VIDEO
AUDIO R
AV2
AUDIO L/MONO
INPUT
VIDEO
Audio cable
AUDIO R
AUDIO L/MONO
Video cable
VIDEO
S-video cable
S-VIDEO
ANTENNA INPUT
VCR
www.insignia-products.com

Connect a VCR

How to connect:
• Connect the Audio/Video cables between the
Audio (L/R)/Video jacks on the unit and VCR.
Note For better video, you can use the S-video terminal
if your source supports it. S-Video input uses the
same circuit as Video1. Only one of them can be
used. S-Video has priority if both connectors are
inserted.
To play VCR
1 Turn on your LCD TV , press Source button
on the remote control.
2 Press CH+/- to select Video1 and press
Enter to confirm.
3 Turn on your VCR , insert a videotape and
press the Play button.
or
Rear of the VCR
W
7