Connecting Power; Connecting A Computer Source - InFocus IN2112 User Manual

Connecting power

Connect the black power cord to the Power connector on the rear of the
projector and to your electrical outlet. The Power light on the Status
Indicator Panel (page 14) turns amber.
NOTE: Always use the power cord that shipped with the projector.

Connecting a computer source

VGA connection
Connect one end of the provided computer cable to the VGA 1 or VGA 2
connector on the projector and the other to the VGA connector on your
computer. If you are using a desktop computer, you will need to disconnect
the monitor cable from the computer's video port first (you can connect this
monitor cable to the Monitor Out connector on the projector, see next page).
Connect power cord
Connect computer cable
8