Temporarily Blanking The Screen - Hitachi CP-X505 User Manual – Operating Manual

Operating

Temporarily blanking the screen

.
Press the BLANK button on the remote control.
The blank screen will be displayed instead of the screen
of input signal. Please refer to the BLANK item in SCREEN
menu
(38).
To exit from the blank screen and return to the input signal screen, press the
BLANK button again.
● The projector automatically returns to the input signal screen when one of
the projector's buttons or the remote control buttons is pressed or one of the
commands (except get commands) is transmitted to the control port.
NOTE • The sound is not connected with the blank screen function. If
necessary, set the volume or mute first.

LASER
INDICATOR
STANDBY/ON VIDEO RGB
BLANK LASER
ASPECT
ENTER
PUSH
PAGE UP PAGE DOWN
ESC MENU RESET
POSITION AUTO
MAGNIFY MY BUTTON VOLUME
ON 1
MUTE
OFF 2
FREEZE KEYSTONE SEARCH