Tc 30 Remote Control Functions - Harman Kardon AVR 745 Service Manual

AVR745

TC 30 REMOTE CONTROL FUNCTIONS

0 USB Connector: Push down on the rubber
cover to access the USB connecter. To program the
TC 30 from our Web site, connect the supplied USB
cable here, and then to your computer.
1 IR Emitter Window: Point this end of the
remote toward the devices being controlled.
2 Power Button: Press this button to turn the
AVR off. Depending on the particular device being
controlled, it may turn other devices on or off. When
an Activity is in use, pressing this button will turn off
all devices associated with the Activity.
3 Activities Button: Press this button to view the
list of Activities programmed into your TC 30. Press
the Screen Button 6 next to an Activity to select it
and turn on the Devices in that Activity.
4 Devices Button: Press this button to display a
list of all the Devices programmed in your TC 30. To
control the Device, press the Screen Button 6
next to the desired Device's name.
5 Help Button: If you are having problems with an
Activity, press this button for interactive help screens
that will resolve issues with synchronizing the status of
the components in your system.
6 Screen Buttons: Press the buttons at either side
of the LCD screen to select the Activity, Device or com-
mand shown next to the button.
7 LCD Screen: The LCD screen displays system
messages, help screens and the functions assigned to
the Screen Buttons 6, depending on the remote's
current status.
8 Page Left/Right Buttons: Press these buttons
to show additional screen display pages for a Device,
Activity or setup function.
9 Transport Control Buttons: Press these buttons
to control the transport functions
Í
/ / for devices such as DVD or CD players,
›› ‹‹
digital recorders and VCRs when they are active.
A Device Control Buttons: These buttons directly
control functions of the currently active device. The
names on the individual button names are the typical
function, but the actual function will vary with the
device. When using the TC 30 to setup and configure
the AVR 745, press the "Menu" button to activate the
on-screen menus.
B Mute Button: Press this button to activate the
MUTE function of the device being controlled.
C Volume Controls: Press these buttons to
change the volume of the device being controlled.
12 TC 30 REMOTE CONTROL FUNCTIONS
D Navigation Buttons: The function of the
‹ ›
/ / /
⁄ ¤
being controlled.
E OK/Enter Button: This button is normally the
"Set," "Enter" or "Select" function for the device being
controlled, but its function will vary, according to the
device being controlled.
F Glow Button: Press this button to illuminate the
LCD screen and the button backlighting. The back-
lighting will also come on when any button is pushed.
You may change the setting for the length of time the
lighting is on through the settings available when your
TC 30 is connected to the Internet. The backlighting
will also turn on automatically any time you move the
remote, thanks to a built-in "tilt sensor. " You may dis-
able the "tilt-on" function in the Remote Options sec-
tion of the TC 30 Web site.
G Channel Up/Down: Press these buttons to
change the device's channel or station. When control-
ling the AVR 745's tuner function, these buttons are
used to step up or down through the list of stations in
the preset memories.
H Numeric Keys: These buttons enter numeric
values for the device being controlled.
I Infrared Learning Port: When "learning" com-
mands from a device's remote into the TC 30, point
the IR transmitter on the remote being "learned" here.
/ / / / /
‹‹ ›› › Î
buttons varies according to the device
14
harman/kardon