Harman Kardon AVR 745 Service Manual page 12

AVR745
REAR-PANEL CONNECTIONS
HDMI Output: Connect this jack to the HDMI
input on a compatible HDMI-equipped video display.
HDMI Inputs: Connect the HDMI output of video
sources such as a DVD player, set-top box or HDTV
tuner to either of these jacks.
Component Video Monitor Outputs: Connect
these outputs to the component video inputs of a
video display.
Multiroom IR Input: Connect the output of an IR
sensor in a remote room to this jack to operate the
AVR 745's multiroom control system.
Component Video Inputs: These inputs may be
used with any source device that is equipped with
analog Y/Pr/Pb or RGB component video outputs, as
assigned through the IN/OUT SETUP menu.
See page 22 for more information on configuring the
component video inputs.
Video Monitor Outputs: Connect these jacks to
the composite or S-video input of a TV monitor or
video projector to view the on-screen menus and the
output of any standard video source selected by the
receiver's video switcher.
DVD Video Inputs: Connect the composite or
S-video outputs of a DVD player or other video source
to these jacks.
Video 1 Video Inputs: Connect the composite or
S-video PLAY/OUT jacks of a VCR or other video
source to these jacks.
Video 1 Video Outputs: Connect the composite
or S-video REC/IN jacks of a VCR or other video
recording device such as a DVD recorder or PVR to
these jacks.
Video 2 Video Inputs: Connect the composite or
S-video PLAY/OUT jacks of a VCR or other video
source to these jacks.
Video 3 Video Inputs: Connect the composite or
S-video PLAY/OUT jacks of a VCR or other video
source to these jacks.
Digital Media Player (DMP) Input:
Bridge
The
TM
With the AVR 745 turned off, connect the optional
Harman Kardon to this connector. Once
The Bridge
TM
this is done and with a compatible iPod
docked in The Bridge, selecting the DMP/The Bridge
input allows you to play audio programming from the
iPod and view navigation menus on the AVR's front
panel and any video display connected to the AVR.
You may control the iPod's functions and select
/‹/› ©, Set œ and
tracks using the /
⁄ ¤
Transport π buttons on the ZR 10 remote or with
the "Listen to The Bridge" activity, which activates
buttons on the TC 30 for direct control of your
iPod through The Bridge. See page 45 for more
information.
10 REAR-PANEL CONNECTIONS
XM-Ready Module Input: When an optional XM
Connect & Play module is connected to this jack, and
the XM service activated, you will be able to enjoy the
XM Radio through your AVR 745. See page 46 for
more information.
USB Connector: Connect a cable with a USB
"Mini B" connector to the AVR and the other end to a
compatible computer running Windows
Windows ® XP or higher with the latest service packs
installed, to use this port to listen to audio from the
computer through the AVR 745. This connection is
also used to connect a compatible computer to the
AVR for firmware upgrades, when available. See page
43 for more information on playback of computer
audio with the AVR. Instructions for upgrades will
accompany the upgrade file download package.
Optical Digital Audio Output: Connect this jack
to the optical digital input connector on a CD-R/RW,
MiniDisc or other compatible digital recorder.
Coaxial Digital Audio Output: Connect this jack
to the coaxial digital input of a CD-R/RW, MiniDisc or
other compatible digital recorder.
DVD Audio Inputs: Connect the left/right analog
outputs of a DVD player or other audio source to
these jacks.
Coaxial Digital Audio Inputs: Connect the coax
digital output from a DVD player, HDTV receiver, LD
player or CD player to these jacks. The signal may be a
Dolby Digital signal, DTS signal or a standard PCM digital
source. Do not connect the RF digital output of an LD
player to these jacks.
Optical Digital Audio Inputs: Connect the optical
digital output from a DVD player, HDTV receiver, LD
player or CD player to these jacks. The signal may be a
Dolby Digital signal, a DTS signal or a standard PCM
digital source.
8-Channel Direct Inputs: These jacks are used
for connection to source devices such as high-resolu-
tion DVD players, DVD-Audio or SACD players with
discrete analog audio outputs. Depending on the
source device in use, all eight jacks may be used,
though in many cases only connections to the front
left/right, center, surround left/right and LFE (sub-
® (optional)
woofer input) jacks will be used for 5.1 audio signals.
Video 1 Audio Inputs: Connect the left/right
PLAY/OUT audio output jacks on a VCR or other video
source to these jacks.
Video 3 Audio Inputs: Connect the left/right
PLAY/OUT audio output jacks on a VCR, PVR, cable
set-top, satellite receiver, HDTV receiver or other video
source to these jacks.
Video 2 Audio Inputs: Connect the left/right
PLAY/OUT audio output jacks on a VCR or other video
source to these jacks.
REC/IN audio input jacks on a VCR or other video
source to these jacks.
an optional external FM antenna to this terminal.
antenna supplied with the receiver to these terminals. If
® 2000,
an external AM antenna is used, make connections to
the AM and GND terminals in accordance with the
instructions supplied with the antenna.
12
harman/kardon
Video 1 Audio Outputs: Connect the left/right
FM Antenna Jack: Connect the supplied indoor or
AM Antenna Connections: Connect the AM loop