Table of Contents
Advertisement
1.3 Charging the battery
New batteries are shipped partially charged. Before you start using your device, it is
recommended that you install and charge the battery. Some batteries perform best
after several full charge/discharge cycles.
To charge the battery
1.
Connect the USB connector of the
AC adapter to the sync connector
on your device.
2.
Plug in the AC adapter to an
electrical outlet to start charging
the battery.
Note
Only the AC adapter and USB sync cable provided with your device must be used to
charge the device.
As the battery is being charged while the power is on, a charging icon
in the title bar of the Home screen. After the battery has been fully charged, a full
battery icon
Depending on the battery charging status, a green or amber light also illuminates
on the LED above the touch screen. See "Front panel" earlier in this chapter for
details.
Warning!
appears in the title bar of the Home screen.
• Do not remove the battery from the device while you are charging it using
the AC or car adapter.
• As a safety precaution, the battery stops charging when it overheats.
Getting Started
appears
Advertisement
Table of Contents
