RECORDING AN AUDIO SOURCE
FUNCTION
1 Select the program source to be recorded.
Turn FUNCTION (or press FUNCTION repeatedly).
2 Set the tape deck or MD recorder to recording
mode.
3 Start the selected program source.
NOTE
• Any sound control system has no effect on recording (see page
10).
• Input sound through the DIGITAL IN terminals cannot be
recorded. When recording the sound from the DVD, CD, MD or
LD player, connect the analogue AUDIO OUT terminals of the
player to the corresponding AUDIO IN terminals of the receiver.
The sound will be recorded in 2 ch stereo.
• Input sound from the tape deck connected to the TAPE IN
terminals cannot be recorded.
12
ENGLISH
MANUAL TUNING
FUNCTION
MULTI JOG
1 Turn FUNCTION (or press FUNCTION repeatedly)
to select the desired band; FM or AM.
2 Press TUNING N or M to tune in a station.
Alternatively, press j or l on the remote control.
"
" is displayed when a station is tuned in.
"1" is displayed for FM stereo reception.
To search for a station automatically (Auto search)
Hold down TUNING N or M (or j or l).
The unit searches for a station and stops at reception.
To stop the search manually, press TUNING N or M (or j or
l).
• Auto search may not stop at stations with weak signals.
RADIO RECEPTION
ENTER
FUNCTION
AUTO PRESET
TUNING
FUNCTION
0-9,+10
C
i,k,j,l
ENTER