Setting The Scene Mode - HP PW460t User Manual

Hp pw460t: user guide

Hide thumbs Also See for PW460t:

Table of Contents

Setting the Scene Mode

By simply selecting one of the following 29 modes, you can capture the image with the most appropriate settings.

From the Record

color) to enter scene mode.

Use the

and

to move through the selections

The highlighted scene mode will either have text that describes the benefits of the mode or have a side-

bysidephoto comparison that illustrates the benefits. The photo on the left is a typical auto mode result and the

photo on the right illustrates the benefit of selecting that scene mode. It is important to note that by selecting a

particular scene mode (other that Auto) will take the camera out of it's normal automatic settings capabilities and

therefore optimise various settings that match a specific scene.

Press the

to save and activate the selected scene mode.

It is important to return the camera to the Auto mode when finished shooting specifics conditions. This will reduce

the risk of taking a bad photo in normal situations. If the camera is powered off and then powered on, it will

return to Auto scene mode be default.

button, tap to select Scene Mode. Or, tap onscreen Record mode button

(red

Table of Contents