Table of Contents
Advertisement
11
Click Next.
12
The Backup or Restore Wizard window shows the
message You have created the following restore
settings. In the window, click the Advanced button.
Click Next.
13
A warning message window opens. Click OK in the
Warning window.
14
Select Replace existing files and then click
Next. Click Next again. Click Finish. The Restore
Progress window opens.
Using Two TV Tuner Cards
(Select models only)
Your HP Digital Entertainment Center can support two
analog antennae (NTSE, PAL, or SECAM), two analog
cables (no set-top box), two cable set-top boxes, or two
satellite TV set-top boxes. You cannot set up the tuners to
different TV signal sources, such as satellite and antenna.
Both TV tuners must be connected to the same signal
Recording two programs at the same time
(Select models only)
1
Press the Media Center Start button
remote control.
2
Select My TV, and then select Guide.
3
Use the arrow buttons to select a show to record, and
then press the Record button on the remote control.
15
Wait until the process completes, and then click
Close in the Restore Progress window.
16
A Backup Utility message window opens. Click Yes
to restart the HP Digital Entertainment Center. Wait
until the restart completes.
Open Media Center and complete the setup. You can
now play previously recorded TV programs that are
broadcaster encrypted.
source. For example, you must use an antenna, cable,
two cable boxes, or two satellite set-top boxes for both
tuner inputs.
With two TV tuners, your HP Digital Entertainment Center
can record two programs at the same time. You can also
watch live TV while recording a program on another
channel.
4
on the
Select a second show to record at the same time,
and then press the Record button again.
5
Follow any onscreen instructions.
Watching and Recording TV Programs
63
Advertisement
Table of Contents
