Field Definitions; Connections List Box; Icon; Name - Compaq Evo T20 Administrator's Manual

Field Definitions

Connections List Box

Icon

✎

Name

Type

Status

Quick Reference and Administrator's Guide
This section highlights the available fields and options in the
user-level Connection Manager window.
This is a list of connections that you can use. Click on a list entry to
select and highlight it, then click on the Connect button to open the
connection, or click on the End button to terminate the connection.
You may also double-click on the selection to open it.
The icon preceding the listed name indicates the type of connection.
A computer terminal icon represents a standard thin client, terminal
emulation, or VPN connection. A telephone icon represents a dial-up
connection. A composite icon consisting of a computer terminal and a
telephone indicates that the standard connection will access the
network through a dial-up server ("tagged" in administrator's Dial-up
connection wizard).
If a standard connection is configured to access an application server
through dial-up (using the connection type's connection wizard), the
icon is not tagged.
Name given to the connection by the administrator when the
connection definition parameters are entered (administrator Add or
Edit button).
Type of connection, selected by the administrator through the Add or
Edit buttons. There are five connection types: RDP, ICA, Dialup,
TEC, and VPN. Refer to the sections later in this chapter for more
information about each one.
If a connection is alive, the status listed for that connection is Active.
If a connection is not alive, the entry is blank.
User's Instructions
2–5