Using Cyberjump And Hyperjump - HP Compaq Presario,Presario 7480 Reference Manual

Using
The CyberJump and HyperJump features combine commonly used tasks into one
convenient grid. CyberJump is used in an Internet window, whereas HyperJump is
CyberJump and
used in your documents.
HyperJump
Before you can use this feature, you must first assign either function, CyberJump or
HyperJump, to a mouse button. You can make your left button, right button, or the
wheel work with CyberJump or HyperJump.
To assign a mouse button or the wheel to CyberJump or HyperJump, complete the
following steps:
1. Click the Start button.
2. Select Settings, then click Control Panel.
3.
4.
5.
6. Open a document.
7. Press the assigned button or wheel to display the CyberJump or HyperJump grid.
8. Move the cursor to an icon on the grid and click an icon to execute a command.
To perform a double-click with the button assigned to CyberJump or HyperJump,
complete the following steps:
1.
2. Select Settings, then click Control Panel.
3. Double-click the Mouse
4.
5.
6.
4-4
Double-click the Mouse
Select the Buttons tab.
Click the Options button and from the dropdown menus, assign CyberJump or
HyperJump to the appropriate scroll mouse button, then click OK.
Click the Start button.
Select the Buttons tab.
Click the Options button, select the CyberJump or HyperJump tab and select
double-click.
Press and release the button quickly when using the double-click function.
Z
icon.
Z
icon.
Introducing the Features of Your Internet PC