HP Compaq Presario,Presario 7479 Supplementary Manual page 41

Replacing a Diskette Drive or Zip
To replace a diskette drive or Zip drive, complete the following steps:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Using a screwdriver, remove the drive cage retaining screws.
+ + + +
NOTE: The view shown may differ slightly from your Internet PC.
4-18
Read all the manufacturer's documentation for the new drive.
Close all programs.
Remove all diskettes and CDs.
From the Windows Taskbar, click the Start button, select Shut Down,
then click OK.
Unplug the computer power cord from the electrical outlet.
Disconnect all cables and power cords from the back of the computer.
Remove the computer cover.
Disconnect the power supply cable from the drive you are replacing.
Disconnect the data cable. Be sure to mark the data cable connector on the
system board so that you can properly connect the data cable for the new device.
Removing the Drive Cage Retaining Screws
®
Drive
(Zip Drive available on select models only)
Upgrading Your Internet PC