Display (Monitor) - Compaq Presario,Presario 5730 Quick Start Manual

Symptom
Diskette drive cannot read a
diskette.
Symptom
Screen is blank, and monitor
power light is not lit.
Screen is blank.
M P —G S
Y RESARIO ETTING TARTED
Problem
Diskette drive has
failed.
Diskette is not
formatted.

Display (Monitor)

Problem
Monitor power cable is
not connected to
monitor or wall outlet.
Monitor is not turned
on.
Monitor connector
cable is not properly
connected to back of
computer.
Screen saver is
enabled.
Computer is in Stand
By mode.
If you have a flat-panel
monitor (available on
select models), you
may need a Digital
Video Interface and
connector.
Solution
Call Compaq Technical Support. Refer to your
Certificate of Warranty for details.
To format the diskette:
1. On the Windows desktop, click Start then
click Control Panel. The Control Panel
window is displayed.
2. Select the diskette (A) drive.
3. Click File, and point to Format.
4. Select the desired options, and click Start to
begin formatting the diskette.
Solution
Reconnect the power plug on back of monitor
and to wall outlet.
Press the Power button on the front of the
monitor.
Inspect the monitor video connector for bent
pins. If bent pins do not exist, reconnect the
monitor connector cable on back of computer.
Press any key or move mouse to make screen
display.
Press the Power button to resume from Stand
By mode.
Refer to your Certificate of Warranty for details.
N S H ? 6-9
EED OME ELP