Hewlett-Packard Vision Field Diagnostics (Windows Systems); Accessing Hp Vision Field Diagnostics (Windows Systems) - HP Compaq 6000 Pro SFF User Manual

Hewlett-Packard Vision Field Diagnostics (Windows
systems)
NOTE:
models only.
The Hewlett-Packard Vision Field Diagnostics utility allows you to view
information about the hardware configuration of the computer and perform
hardware diagnostic tests on the subsystems of the computer. The utility
simplifies the process of effectively identifying, diagnosing, and isolating
hardware issues.
The Survey tab is displayed when you invoke HP Vision Field Diagnostics.
This tab shows the current configuration of the computer. From the Survey
tab, there is access to several categories of information about the
computer. Other tabs provide additional information, including diagnostic
test options and test results. The information in each screen of the utility
can be saved as an html file and stored on a diskette or USB flash drive.
Use HP Vision Field Diagnostics to determine if all the devices installed on
the computer are recognized by the system and functioning properly.
Running tests is optional but recommended after installing or connecting a
new device.
You should run tests, save the test results, and print them so that you have
printed reports available before placing a call to the Customer Support
Center.
NOTE:
Diagnostics.

Accessing HP Vision Field Diagnostics (Windows systems)

To access HP Vision Field Diagnostics, you must burn the utility onto a CD
or copy it onto a USB flash drive then boot to the CD or USB flash drive. It
can also be downloaded from
or installed to a USB flash drive. See
HP Vision Field Diagnostics on page 5
4 Quick Setup & Getting Started
HP Vision Field Diagnostics is included on CD with some computer
Third party devices may not be detected by HP Vision Field
http://www.hp.com
Downloading the Latest Version of
for more information.
and either burned to CD
ENWW