Using Hotkeys And Shortcut Keys With External Keyboards; Turning A Multiport Device On Or Off (Fn+F2) - Compaq Evo N620c Series Hardware Manual

Pointing Devices and Keyboard
Using Hotkeys and Shortcut Keys with External
Keyboards
Most hotkeys and shortcut keys can be used as described at
anytime and from within any application, with 2 exceptions:
■
To use hotkeys or shortcut keys on an external keyboard,
press the scroll lock key twice, then the other key of the
hotkey combination. For example, to use the
press
■
Hotkeys and shortcut keys may not function on an external
keyboard connected through a USB connector if Easy Access
Buttons software is not loaded. You can download the
appropriate software and drivers for your system at
www.compaq.com.
refer on this CD to the Software Guide, "Software Updates
and Restorations" chapter. For more information about Easy
Access Buttons, refer to "Using Easy Access Buttons" later
in this chapter.

Turning a MultiPort Device On or Off (Fn+F2)

Press
Fn+F2
receive messages) or off (to conserve power).
The
Fn+F2
MultiPort can be set to remain on or off with the
disabled in Computer Setup. To access these settings:
1. To open Computer Setup, turn on or restart the notebook,
then press
displayed. (An F10 = ROM Based Setup message is
displayed in the lower left corner of the screen.)
❏
❏
❏
2. Select the Security menu.
3–8
scroll lock+scroll lock+F10.
For more information on software updates,
to toggle a device in the MultiPort on (to send or
hotkeys are enabled by default. The device in the
as soon as the Compaq splash screen is
F10
To change the language, press
To view navigation information, press
To return to the Computer Setup menu, press
Fn+F10
Fn+F2
F2.
F1.
Hardware Guide
hotkeys,
hotkeys
esc.