Removal and Replacement Procedures
5.12 Top Cover
Top cover
1. Prepare the computer for disassembly (Section 5.3) and, in
the order below, remove the following components:
❏
❏
❏
❏
❏
2. Turn the computer bottom side up with the front facing you.
✎
The top cover is secured to the base enclosure by 15 screws that
are two different sizes. Be sure to carefully note the size and
location from which each screw was removed.
5–24
Spare Part Number Information
LED cover (Section 5.6)
Keyboard (Section 5.7)
Optical drive (Section 5.8)
Display (Section 5.9)
Heat sink (Section 5.10)
Top Cover
Maintenance and Service Guide
233568-001