Gigabyte GA-P35T-DS3P User Manual page 19

• Removing the Card from the PCIE_16_1 Slot:
Pull out the small white-drawable bar at the end of the PCI Express x16 slot
to release the card and then pull the card straight up from the slot.
You can also press the latch on the back of the white-drawable bar to
release the card.
• Removing the Card from the PCIE_16_2 Slot:
Press the white latch at the end of the PCI Express x16 slot to release the
card and then pull the card straight up from the slot.
• The motherboard provides a PCIE_12V power connector, which can sup-
ply extra power to the onboard PCI Express x16 slots. When you install
two graphics cards, connect the power cable from your power supply to
this connector.
- 19 - Hardware Installation