Standard Cmos Features - Gigabyte GA-P35T-DQ6 User Manual

2-3

Standard CMOS Features

CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Date (mm:dd:yy)
Time (hh:mm:ss)
IDE Channel 0 Master
IDE Channel 0 Slave
IDE Channel 1 Master
IDE Channel 1 Slave
IDE Channel 2 Master
IDE Channel 3 Master
IDE Channel 4 Master
IDE Channel 4 Slave
IDE Channel 5 Master
IDE Channel 5 Slave
Drive A
Floppy 3 Mode Support
Halt On
: Move Enter: Select
F5: Previous Values
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Base Memory
Extended Memory
Total Memory
: Move Enter: Select
F5: Previous Values
Date
Sets the system date. The date format is week (read-only), month, date and year. Select the
desired field and use the up arrow or down arrow key to set the date.
Time
Sets the system time. For example, 1 p.m. is 13:0:0. Select the desired field and use the up arrow
or down arrow key to set the time.
IDE Channel 0/1 Master/Slave
IDE HDD Auto-Detection
Press <Enter> to autodetect the parameters of the IDE/SATA device on this channel.
IDE Channel 0 Master/Slave
Configure your IDE/SATA devices by using one of the three methods below:
Standard CMOS Features
Thu, Apr 12 2007
18:25:04
[None]
[None]
[None]
[None]
[None]
[None]
[None]
[None]
[None]
[None]
[1.44M, 3.5"]
[Disabled]
[All, But Keyboard]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Default
Standard CMOS Features
640K
511M
512M
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Default
- 41 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup