Gigabyte GA-MA790X-DS4 User Manual page 74

Am2+/am2 socket motherboard for amd phenom fx processor/ amd phenom processor/ amd athlon 64 fx processor/ amd athlon 64 x2 dual-core processor/ amd athlon 64 processor/amd sempron processor
Hide thumbs Also See for GA-MA790X-DS4:
Table of Contents

Advertisement

B. Configuring SATA controller mode in BIOS Setup
Make sure to configure the SATA controller mode correctly in system BIOS Setup .
Step 1:
Turn on your computer and press <Delete> to enter BIOS Setup during the POST (Power-On Self-Test).
Under Integrated Peripherals, ensure OnChip SATA Controller is enabled. To create RAID, set
OnChip SATA Type to RAID (Figure 1).
IDE Configuration
OnChip SATA Controller
OnChip SATA Type
Onboard Audio Function
Onboard 1394 Function
Onboard LAN Function
Onboard LAN Boot ROM
SMART LAN
OnChip USB Controller
USB EHCI Controller
USB Keyboard Support
USB Mouse Support
Legacy USB storage detect
Onboard Serial Port 1
Onboard Parallel Port
Parallel Port Mode
x ECP Mode Use DMA
: Move
Enter: Select
F5: Previous Values
Step 2:
Save changes and exit BIOS Setup.
The BIOS Setup menus described in this section may differ from the exact settings for your
motherboard. The actual BIOS Setup menu options you will see shall depend on the motherboard
you have and the BIOS version.
GA-MA790X-DS4 Motherboard
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Integrated Peripherals
+/-/PU/PD: Value
F6: Fail-Safe Defaults
[Press Enter]
[Enabled]
[RAID]
[Auto]
[Enabled]
[Enabled]
[Disabled]
[Press Enter]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[3F8/IRQ4]
[378/IRQ7]
[SPP]
3
F10: Save
Figure 1
- 74 -
Item Help
Menu Level
ESC: Exit
F1: General Help
F7: Optimized Defaults

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents