5-4
Configuring Your HDTV LCD TV's Resolution
After connecting an HDTV LCD TV to your computer, follow the steps below to configure your HDTV's
resolution.
Configuring the Resolution:
After installing the ATI graphics driver from the motherboard driver disk, select the appropriate resolution.
Step 1:
You will find an ATI Catalyst Control Center icon
your system tray. Right-click the icon to select Catalyst
Control Center. Or you can right-click on the desktop to
select ATI CATALYST(R) Control Center.
Step 2:
Select Advanced view and click Next. Follow the on-screen
instructions to enter CATALYST
Step 3:
In the Display Manager menu, select the resolution that
suits your HDTV. For example, for 1080p, select 1920x
1080 and set refresh rate at 60 Hz. And press OK.
HDTV Format
Resolution
1080p
1920 x1080
1080i
1920 x1080
720p
1280 x720
(Note): HDMI supports up to 1080p resolution; YPbpr component supports
up to 1080i resolution.
If you cannot find the resolution you need in the Desktop
area list in the Display Manager menu, go to DTV (HDMI) 2
> HDTV Support. In the HDTV modes supported by this
display area, select the check box of a format for your
HDTV and click OK to add it into the Display Manager
menu.
Control Center.
TM
Refresh Rate
60 Hz
30 Hz
60 Hz
- 95 -
in
Appendix