Gigabyte GA-M61SME-S2 User Manual page 40

Power-On by Alarm
You can enable the "Power-On by Alarm" item and key in Date/Time to power on system.
Disabled
Enabled
If Power-On by Alarm is Enabled.
Day of Month Alarm :
Time (hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59)
HPET Support
Disabled
Enabled
HPET Mode
(Note)
32-bit mode
64-bit mode
Power On By Mouse
Disabled
Double Click
Power On By Keyboard
Disabled
Password
Any KEY
Keyboard 98 If your keyboard has a "POWER Key" button, you can press the key to power
KB Power ON Password
When "Power On by Keyboard" set at Password, you can set the password here.
Enter
AC Back Function
Soft-Off
Full-On
(Note) Supported on Vista operating system only.
GA-M61SME-S2 Motherboard
Disable this function. (Default value)
Enable alarm function to POWER ON system.
Everyday, 1~31
(Note)
Disable this function.
Enable support for High Precision Event Timer (HPET) funtion. (Default value)
Select 32-bit mode for 32-bit Vista operating system. (Default value)
Select 64-bit mode for 64-bit Vista operating system.
Disable this function. (Default value)
Double click on PS/2 mouse left button to power on the system.
Disable this function. (Default value)
Enter from 1 to 5 characters to set the Keyboard Power On Password.
Press any key to power on the system.
on the system.
Input password (from 1 to 5 characters) and press Enter to set the Keyboard
Power On password.
When AC-power back to the system, the system will be in "Off" state.
(Default value)
When AC-power back to the system, the system always in "On" state.
- 40 -