Gigabyte GA-M61SME-S2 User Manual page 37

NV SATA RAID function
Enabled
Disabled
NV SATA 1 Primary RAID
Enabled
Disabled
NV SATA 1 Secondary RAID
Enabled
Disabled
On-Chip IDE Channel0
Enabled
Disabled
On-Chip MAC Lan
Auto
Disabled
NV Serial-ATA 1
Enabled
Disabled
IDE Prefetch Mode
Enabled
Disabled
USB Memory Type
SHADOW
Base Memory(640K)
Onboard Audio Function
Auto
Disabled
Onboard LAN Boot ROM
This function decide whether to invoke the boot ROM of the onboard LAN chip.
Enabled
Disabled
Onboard Serial Port 1
Auto
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Disabled
Enable NV SATA RAID function.
Disable NV SATA RAID function. (Default value)
Enable NV SATA 1 primary RAID function.
Disable this function. (Default value)
Enable NV SATA 1 secondary RAID function.
Disable this function. (Default value)
Enable onboard 1st channel IDE port. (Default value)
Disable onboard 1st channel IDE port.
Auto-detect onboard LAN chip function. (Default value)
Disable onboard LAN chip function.
Enable NV Serial-ATA 1 function. (Default value)
Disable this function.
Enable IDE data buffer to enhance HDD transfer speed. (Default value)
Disable IDE data buffer for the system stability.
Set USB memory type to SHADOW. (Default value)
Set USB memory type to base memory(640 K).
Auto-detect onboard audio function. (Default value)
Disable this function.
Enable this function.
Disable this function. (Default value)
BIOS will automatically setup the Serial port 1 address.
Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default value)
Enable onboard Serial port 1 and address is 2F8/IRQ3.
Enable onboard Serial port 1 and address is 3E8/IRQ4.
Enable onboard Serial port 1 and address is 2E8/IRQ3.
Disable onboard Serial port 1.
- 37 - BIOS Setup