Load Optimized Defaults; Set Supervisor/User Password - Gigabyte GA-K8NXP-9 User Manual

HT-Link voltage control
Normal
+0.1V
+0.2V
+0.3V
DDR voltage control
Please note that by overclocking your system through the increase of the DDR voltage, damage
to the memory may occur.
Normal
+0.1V
+0.2V
2-8

Load Optimized Defaults

Standard CMOS Features
Advanced BIOS Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
PC Health Status
ESC: Quit
F8: Dual BIOS/Q-Flash
Selecting this field loads the factory defaults for BIOS and Chipset Features which the system automatically
detects.
2-9

Set Supervisor/User Password

Standard CMOS Features
Advanced BIOS Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
PC Health Status
ESC: Quit
F8: Dual BIOS/Q-Flash
When you select this function, the following message will appear at the center of the screen to assist
you in creating a password.
Type the password, up to eight characters, and press <Enter>. You will be asked to confirm the
password. Type the password again and press <Enter>. You may also press <Esc> to abort the
Supply HT-Link voltage as HT-Link required. (Default value)
Increase HT-Link voltage +0.1V.
Increase HT-Link voltage +0.2V.
Increase HT-Link voltage +0.3V.
Supply DDR voltage as DDR required. (Default value)
Increase DDR voltage +0.1V.
Increase DDR voltage +0.2V.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Load Optimized Defaults (Y/N)? N
Load Optimized Defaults
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Enter Password:
Change/Set/Disable Password
- 45 -
MB Intelligent Tweaker(M.I.T.)
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
: Select Item
F10: Save & Exit Setup
MB Intelligent Tweaker(M.I.T.)
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
: Select Item
F10: Save & Exit Setup
BIOS Setup