Power Management Setup - Gigabyte GA-K8NXP-9 User Manual

2-4

Power Management Setup

ACPI Suspend Type
Soft-Off by Power button
PME Event Wake Up
Modem Ring On
USB Resume from Suspend
Power-On by Alarm
x Day of Month Alarm
x Time (hh:mm:ss) Alarm
Power On By Mouse
Power On By Keyboard
AC BACK Function
: Move Enter: Select
F5: Previous Values
ACPI Suspend Type
S1(POS) Set ACPI suspend type to S1/POS(Power On Suspend). (Default value)
S3(STR) Set ACPI suspend type to S3/STR(Suspend To RAM).
Soft-Off by Power button
Instant-Off Press power button then Power off instantly. (Default value)
Delay 4 Sec. Press power button 4 sec. to Power off. Enter suspend if button is pressed
less than 4 sec.
PME Event Wake Up
This feature requires an ATX power supply that provides at least 1A on the 5VSB lead.
Disabled Disable this function.(Default value)
Enabled Enable PME as wake up event.
Modem Ring On
An incoming call via modem can awake the system from any suspend state.
Disabled Disable this function. (Default value)
Enabled Enable Modem Ring On function.
USB Resume from Suspend
Disabled Disable this function. (Default value)
Enable Enable USB device wake up system from suspend mode.
Power-On by Alarm
You can set "Power-On by Alarm" item to enabled and key in Date/Time to power on system.
Disabled Disable this function. (Default value)
Enabled Enable alarm function to POWER ON system.
If Power-On by Alarm is Enabled.
Day of Month Alarm :
Time (hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59)
GA-K8NXP-9 Motherboard
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Power Management Setup
[S1(POS)]
[Instant-Off]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Everyday
0 : 0 : 0
[Disabled]
[Disabled]
[Soft-Off]
+/-/PU/PD: Value
Everyday, 1~31
- 40 -
Item Help
Menu Level
F10: Save ESC: Exit
F7: Optimized Defaults
F1: General Help