Read Me First - Gigabyte GA-K8NNXP-940 User Manual

Read Me First !

When you installing AGP card, please make sure the following notice is fully understood and
practiced. If your AGP card has "AGP 4X/8X(1.5V) notch" (show below), please make sure your
AGP card is AGP 4X/8X(1.5V).
AGP 4X/8X notch
® ™
AGP 2X(3.3V) card is not supported by nVIDIA nForce 3 150 chipset. You might experience
system unable to boot up normally. Please insert an AGP 4X/8X(1.5V) card.
Although Gigabyte's AG32S(G) graphics card is based on ATi Rage 128 Pro chip, the design of
AG32S(G) is compliance with AGP 4X(1.5V) specification. Therefore, AG32S(G) will work fine
® ™
with nVIDIA nForce 3 150 based motherboards.
Before you install PCI cards, please remove the Dual BIOS label from PCI slots if there is one.
GA-K8NNXP-940 Motherboard - 4 -
4 2003/10/2, ¤U¤È 05:18
k8nnxp-940_1001_i.p65