Gigabyte GA-K8NNXP-940 User Manual page 33

14) RAM_LED
Do not remove memory modules while RAM_LED is on. It might cause short or other unexpected
damages due to the stand by voltage. Remove memory modules only when AC power cord is
disconnected.
15) 2X_DET
When an AGP 2X (3.3V) card is installed the 2X_DET will light up, indicating a non-supported
graphics card is inserted. Informing users that system might not boot up normally due to AGP 2X
(3.3V) is not supported by the chipset.
k8nnxp-940_1001_q.p65
- 33 -
33
+
_
+
_
Hardware Installation Process
2003/10/2, ¤U¤È 05:19