Table of Contents
Advertisement
4-1-3 Flash BIOS Method Introduction
Under the normal circumstances, the system works on the Main BIOS. If the Main BIOS is corrupted or
damaged, the Backup BIOS can take over while the system is powered on. This means that your PC
will still be able to run stably as if nothing has happened in your BIOS.
B. How to use Dual BIOS and Q-Flash Utility?
a. After power on the computer, pressing <Del> immediately during POST (Power On Self Test) it will
allow you to enter Award BIOS CMOS SETUP, then press <F8> to enter Flash utility.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Standard CMOS Features
Advanced BIOS Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
PC Health Status
MB Intelligent Tweaker(M.I.T.)
ESC: Quit
F8: Dual BIOS/Q-Flash
b. Dual BIOS / Q-Flash Programming Utility
Boot From.................................................
Main ROM Type/Size...............................
Backup ROM Type/Size...........................
PgDn/PgUp: Modify
A. What is Dual BIOS Technology?
Dual BIOS means that there are two system BIOS (ROM) on the
motherboard, one is the Main BIOS and the other is Backup BIOS.
Time, Date, Hard Disk Type...
Dual BIOS Utility V1.33
Wide Range Protection
Disable
Boot From
Main Bios
Auto Recovery
Enable
Halt On Error
Disable
Keep DMI Data
Enable
Copy Main ROM Data to Backup
Load Default Settings
Save Settings to CMOS
Q-Flash Utility
Update Main BIOS from Floppy
Update Backup BIOS from Floppy
Save Main BIOS to Floppy
Save Backup BIOS to Floppy
: Move
- 57 -
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
: Select Item
F10: Save & Exit Setup
Main Bios
SST 49LF004A
512K
SST 49LF004A
512K
ESC: Reset
F10: Power Off
Appendix
Advertisement
Table of Contents
