Table of Contents
Advertisement
CPU Warning Temperature
60
C / 140
F Monitor CPU temperature at 60
o
o
70
C / 158
F Monitor CPU temperature at 70
o
o
80
C / 176
F Monitor CPU temperature at 80
o
o
90
C / 194
F Monitor CPU temperature at 90
o
o
Disabled
Disable this function. (Default value)
CPU FAN Fail Warning
Disabled
Disable CPU fan fail warning function. (Default value)
Enabled
Enable CPU fan fail warning function.
CPU Smart FAN Control
Disabled
Disable this function.
Enabled
When this function is enabled, CPU fan will run at different speed depending on
CPU temperature. Users can adjust the fan speed with Easy Tune based on
their requirements. (Default value)
CPU FAN Manual Control
CPU Smart Fan Control will become disabled when this item is enabled.
Enabled
Enable the CPU fan manual control function.
Disabled
Disable the CPU fan manual control function. (Default value)
CPU FAN: Low Speed
Set the parameter of the CPU fan speed.
The CPU FAN: Low Speed option configures the speed of the CPU fan when the CPU temperature
is below the temperature set in Temp Limit of Mid Speed. The parameter can be adjusted from
0~127. Higher parameter means faster CPU fan speed. (Default parameter: 8)
CPU FAN: Mid Speed
Set the parameter of the CPU fan speed.
The CPU FAN: Mid Speed option configures the speed of the CPU fan when the CPU temperature
exceeds the temperature set in Temp Limit of Mid Speed. The parameter can be adjusted from
0~127. Higher parameter means faster CPU fan speed. (Default parameter: 12)
CPU FAN: High Speed
Set the parameter of the CPU fan speed.
The CPU FAN: High Speed option configures the speed of the CPU fan when the CPU temperature
exceeds the temperature set in Temp Limit of High Speed. The parameter can be adjusted from
0~127. Higher parameter means faster CPU fan speed. (Default parameter: 80)
Temp of FAN turn off (Default temperature: 0
When the CPU temperature is below the value set in this option, the CPU fan will stop spinning.
Temp Limit of Low Speed (Default temperature: 20
The CPU fan will stop spinning when the CPU temperature is below the value set in Temp of
FAN turn off option. The CPU fan will start to spin again with the parameter set in CPU FAN: Low
Speed when the CPU temperature exceeds the value set in Temp Limit of Low Speed.
The CPU fan runs at full speed when both CPU Smart FAN Control and CPU FAN Manual
Control are disabled.
GA-K8NF9 Ultra Motherboard
C / 140
F.
o
o
C / 158
F.
o
o
C / 176
F.
o
o
C / 194
F.
o
o
C)
o
C)
o
- 42 -
Advertisement
Table of Contents
