Gigabyte GA-K8N Ultra-9 User Manual page 38

On-Chip USB
V1.1+V2.0
V1.1
Disabled
USB Memory Type
SHADOW
Base Memory (640K) Set USB Memory Type to Base Memory (640K).
USB Keyboard Support
Enabled
Disabled
USB Mouse Support
Enabled
Disabled
AC97 Audio
Auto
Disabled
Onboard 1394
Enabled
Disabled
Onboard LAN control (LAN1)
Enabled
Disabled
OnBoard LAN Boot ROM
This function decide whether to invoke the boot ROM of the onboard LAN chip.
Enabled
Disabled
SATA RAID-5 Function (Controlled by Sil3114 chip)
This option is to enable or disable the Serial ATA function of the Sil3114 controller. To set either RAID
or non-RAID mode, you have to enter the Sil3114 RAID BIOS utility. (Upon system reboot, press
<Ctrl+S> or <F4> key to enter Sil3114 RAID BIOS). If you want to set up a non-RAID configuration,
please select JBOD mode from the RAID BIOS.
Enabled
Disabled
Onboard Serial Port 1
Auto
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Disabled
GA-K8N Ultra-9 Motherboard
Enable USB 1.1 and USB 2.0 controllers. (Default Value)
Enable only USB 1.1 controller
Disable onchip USB support.
Set USB Memory Type to SHADOW. (Default value)
Enable USB keyboard support.
Disable USB keyboard support. (Default value)
Enable USB mouse support.
Disable USB mouse support. (Default value)
Autodetect onboard AC'97 audio function. (Default value)
Disable this function.
Enable onboard IEEE1394 function.(Default value)
Disable onboard IEEE1394 function.
Enable onboard LAN chip function.(Default value)
Disable onboard LAN chip function.
Enable this function.
Disable this function. (Default value)
Enable onboard Serial ATA Chip.(Default value)
Disable onboard Serial ATA Chip.
BIOS will automatically setup the port 1 address.
Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default value)
Enable onboard Serial port 1 and address is 2F8/IRQ3.
Enable onboard Serial port 1 and address is 3E8/IRQ4.
Enable onboard Serial port 1 and address is 2E8/IRQ3.
Disable onboard Serial port 1.
- 38 -