Gigabyte GA-EX58-UD3R User Manual page 39

CPU Thermal Monitor
Enables or disables Intel CPU Thermal Monitor function, a CPU overheating protection function.
When enabled, the CPU core frequency and voltage will be reduced when the CPU is overheated.
(Default: Enabled)
CPU EIST Function
Enables or disables Enhanced Intel SpeedStep Technology (EIST). Depending on CPU loading,
Intel EIST technology can dynamically and effectively lower the CPU voltage and core frequency
to decrease average power consumption and heat production. (Default: Enabled)
Virtualization Technology
Enables or disables Intel Virtualization Technology. Virtualization enhanced by Intel Virtualization
Technology will allow a platform to run multiple operating systems and applications in independent
partitions. With virtualization, one computer system can function as multiple virtual systems.
(Default: Enabled)
Bi-Directional PROCHOT
Enabled
Disabled
******* UnCore & QPI Features *******
QPI Link Speed
QPI Link Speed
Uncore Frequency
Uncore Frequency
Isochronous Support
: Move
Enter: Select
F5: Previous Values
QPI Link Speed
Allows you to set the QPI Link speed. Options are: Auto (default), x36, x44, x48, Slow Mode.
UnCore Frequency
Allows you to set the UnCore frequency. Options are: Auto (default), x12~x48.
Isochronous Support
Determines whether to enable specific streams between the IOH and ICH. (Default: Enabled)
(Note) This item appears only if you install a CPU that supports this feature.
(Note)
(Note)
(Note)
(Note)
When the CPU or chipset detects that an overheating is occurring, PROCHOT
signals will be emitted to lower CPU performance to decrease heat production.
(Default)
Only allows the CPU to detect whether an overheating is occurring to emit
PROCHOT signals.
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
UnCore & QPI Features
+/-/PU/PD: Value
F6: Fail-Safe Defaults
[Auto]
4.8GHz
[Auto]
2133MHz
[Enabled]
F10: Save
- 39 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup