Mb Intelligent Tweaker(M.i.t.) - Gigabyte GA-945PL-S3E User Manual

2-7

MB Intelligent Tweaker(M.I.T.)

CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
CPU Clock Ratio (Note)
Robust Graphics Booster
O.C FSB 1333 Core.2 CPU
CPU Host Clock Control
x CPU Host Frequency (Mhz)
x PCI Experss Frequency (Mhz)
System Memory Multiplier
Memory Frequency (Mhz)
DIMM OverVoltage Control
PCI-E OverVoltage Control
FSB OverVoltage Control
CPU Voltage Control
Normal CPU Vcore
: Move Enter: Select
F5: Previous Values
Incorrectly using these features may result in system instability or corruption.
Doing a overclock or overvoltage on CPU, chipsets and memory modules may result in
damages or shortened life expectancy to these components.
Please be aware that the M.I.T. menu items are for power users only.
CPU Clock Ratio
(Note)
This setup option will automatically assign by CPU detection.
The option will display "Locked" and read only if the CPU ratio is not changeable.
Robust Graphics Booster
Select the options can enhance the VGA graphics card bandwidth to get higher performance.
Auto Set Robust Graphics Booster to Auto. (Default value)
Fast Set Robust Graphics Booster to Fast.
Turbo Set Robust Graphics Booster to Turbo.
O.C FSB 1333 Core.2 CPU
Enable use of a Core
FSB 1333 MHz Core
Auto Set this item to Auto. Then save the changes and restart your computer.
During the POST, a message will appear asking if you want to enable the use
of a FSB 1333 Core
press any key to continue the POST. (Default value)
Disabled Disable this function.
Enabled Enable this function.
CPU Host Clock Control
Please note that if your system is overclocked and cannot restart, please wait 20secs.
for automatic system restart or clear the CMOS setup data and perform a safe restart.
Disabled Disable CPU Host Clock Control. (Default value)
Enabled Enable CPU Host Clock Control.
(Note) This item will show up when you install a processor which supports this function.
GA-945PL-S3E Motherboard
MB Intelligent Tweaker(M.I.T.)
[18X]
[Auto]
[Auto]
[Disabled]
200
Auto
[Auto]
533
[Normal]
[Normal]
[Normal]
[Normal]
1.3875V
+/-/PU/PD: Value
F6: Fail-Safe Defaults
2 CPU with 1333 MHz FSB through overclocking. You must install the
TM
2 CPU with DDR2 533 (or above) memory module(s).
TM
2 processor. Press <Y> to confirm or <N> to reject. Or
TM
- 44 -
Menu Level
F10: Save ESC: Exit
F7: Optimized Defaults
Item Help
F1: General Help