Table of Contents
Advertisement
Turbo
Set C.I.A.2 to Turbo. (Automatically increase CPU frequency(15%,17%) by
CPU loading.
Full Thrust
Set C.I.A.2 to Full Thrust. (Automatically increase CPU frequency(17%,
19%) by CPU loading.
Warning: Stability is highly dependent on system components.
CPU Host Clock Control
Please note that if your system is overclocked and cannot restart, please wait 20secs.
for automatic system restart or clear the CMOS setup data and perform a safe restart.
Disabled
Disable CPU Host Clock Control. (Default value)
Enabled
Enable CPU Host Clock Control.
CPU Host Frequency (Mhz)
100MHz ~ 600MHz
If you use a 533 MHz FSB processor, set "CPU Host Frequency" to 133 MHz.
If you use an 800 MHz FSB processor, set "CPU Host Frequency" to 200 MHz.
If you use a 1066 MHz FSB processor, set "CPU Host Frequency" to 266 MHz.
Incorrect using it may cause your system broken. For power End-User use only!
PCI Express Frequency (Mhz)
Auto
Set PCI Express frequency automatically. (Default value)
90~150
Set PCI Express frequency from 90MHz to 150MHz.
System Memory Multiplier
The adjustable range will vary based on the CPU FSB. Default value: Auto (set memory
frequency by DRAM SPD data). Wrong frequency settings may cause system unable to boot.
Clear CMOS to overcome wrong frequency issue.
Memory Frequency (Mhz)
The values depend on CPU Host Frequency (Mhz) and System Memory Multiplier setting.
DIMM OverVoltage Control
Please note that by overclocking your system through the increase of the DIMM voltage, damage
to the memory may occur.
Normal
Supply DIMM voltage as DIMM required. (Default value)
+0.1V ~ +0.6V
Increase DIMM voltage by +0.1V to +0.6V.
PCI-E OverVoltage Control
Normal
Supply PCI-E voltage as PCI-E required. (Default value)
+0.1V ~ +0.3V
Increase PCI-E voltage by +0.1V to +0.3V.
FSB OverVoltage Control
Normal
Supply FSB voltage as FSB required. (Default value)
+0.1V ~ +0.3V
Increase FSB voltage by +0.1V to +0.3V.
CPU Voltage Control
Supports adjustable CPU vcore. The adjustable range is dependent on CPUs.
(Default value: Normal)
Please note that by overclocking your system through the increase of the CPU voltage, damage
to the CPU or decrease in the CPU life expectancy may occur.
Normal CPU Vcore
Display your CPU's normal voltage.
Set CPU Host Frequency from 100MHz to 600MHz.
- 45 -
BIOS Setup
Advertisement
Table of Contents
