Table of Contents
Advertisement
Item Checklist
þ The GA-8PE800 Ultra /Pro(-R) motherboard
þ CD for motherboard driver & utility
þ GA-8PE800 Ultra /Pro(-R) user's manual
þ Quick PC Installation Guide
þ ITE RAID Manual
v,t
þ SATA RAID Manual
v
þ Motherboard Settings Label
o GC-SATA Card (Optional)
(Manual ; SATA cable x1 ; Power cable x 1)
C
omputer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To protect
them against damage from static electricity, you should follow some precautions whenever you work on
your computer.
1.
Unplug your computer when working on the inside.
2.
Use a grounded wrist strap before handling computer components. If you do not have
one, touch both of your hands to a safely grounded object or to a metal object, such as
the power supply case.
3.
Hold components by the edges and try not touch the IC chips, leads or connectors, or
other components.
4.
Place components on a grounded antistatic pad or on the bag that came with the
components whenever the components are separated from the system.
5.
Ensure that the ATX power supply is switched off before you plug in or remove the ATX
power connector on the m otherboard.
Installing the motherboard to the chassis...
If the motherboard has mounting holes, but they don' t line up with the holes on the base and there
are no slots to attach the spacers, do not become alarmed you can still attach the spacers to the
mounting holes. Just cut the bottom portion of the spacers (the spacer may be a little hard to cut off, so
be careful of your hands). In this way you can still attach the motherboard to the base without worrying
about short circuits. Sometimes you may need to use the plastic springs to isolate the screw from the
motherboard PCB surface, because the circuit wire may be near by the hole. Be careful, don't let the
screw contact any printed circuit write or parts on the PCB that are near the fixing hole, otherwise it may
damage the board or cause board malfunctioning.
* For GA-8PE800 Pro Only tFor GA-8PE800 Pro-R Only vFor GA-8PE800 Ultra Only
GA-8PE800 Ultra / Pro(-R) Motherboard
þ IDE cable x1 / Floppy cable x 1 *
þ IDE cable x3 / Floppy cable x 1
þ 2 Port USB Cable x 2
þ IEEE 1394 Cable x 1
þ SATA cable x2
þ Audio combo kit x1
(SURROUND-Kit + SPDIF Out KIT)
þ SPDIF Kit x1(SPDIF Out KIT)
v
þ I/O Shield
- 4 -
v,t
v
v
*
t,
Advertisement
Table of Contents
