Table of Contents
Advertisement
Item Checklist
The GA-8PE667 Ultra/Pro motherboard
IDE cable x1 / Floppy cable x 1
IDE cable x2(**)
CD for motherboard driver & utility
GA-8PE667 Ultra/Pro user's manual
I/O Shield
Quick PC Installation Guide
WARNING!
Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To
protect them against damage from static electricity, you should follow some precautions whenever
you work on your computer.
1.
Unplug your computer when working on the inside.
2.
Use a grounded wrist strap before handling computer components. If you do not have
one, touch both of your hands to a safely grounded object or to a metal object, such as
the power supply case.
3.
Hold components by the edges and try not touch the IC chips, leads or connectors, or
other components.
4.
Place components on a grounded antistatic pad or on the bag that came with the
components whenever the components are separated from the system.
5.
Ensure that the ATX power supply is switched off before you plug in or remove the ATX
ower connector on the motherboard.
Installing the motherboard to the chassis...
If the motherboard has mounting holes, but they don't line up with the holes on the base and
there are no slots to attach the spacers, do not become alarmed you can still attach the spacers to
the mounting holes. Just cut the bottom portion of the spacers (the spacer may be a little hard to
cut off, so be careful of your hands). In this way you can still attach the motherboard to the base
without worrying about short circuits. Sometimes you may need to use the plastic springs to isolate
the screw from the motherboard PCB surface, because the circuit wire may be near by the hole. Be
careful, don't let the screw contact any printed circuit write or parts on the PCB that are near the
fixing hole, otherwise it may damage the board or cause board malfunctioning.
* For GA-8PE667 Pro Only. ** For GA-8PE667 Ultra Only.
GA-8PE667Ultra /Pro Motherboard
2 Port USB Cable x 1
4 Port USB Cable x 1
SPDIF KIT x 1(SPD-KIT)(*)
RAID Manual (**)
Audio combo kit x1(**)
Motherboard Settings Label
- 4 -
Advertisement
Table of Contents
