b. Dual BIOS / Q-Flash Utility
Wide Range Protection
Halt On BIOS Defects
Auto Recovery
Boot From
BIOS Recovery
F3: Load Default
F7: Save And Restart
F8: Update BIOS from disk
Use <Space> key to toggle setup
c. Dual BIOS Item explanation:
Wide Range Protection: Disabled(Default), Enabled
Status 1:
If any failure (ex. Update ESCD failure, checksum error or reset...) occurs in the Main BIOS , just
before the Operating System is loaded and after the power is on, and that the Wide Range
Protection is set to "Enable", the PC will boot from Backup BIOS automatically.
Status 2:
If the ROM BIOS on peripherals cards(ex. SCSI Cards, LAN Cards,..) emits signals to request
restart of the system after the user make any alteration on it, the boot up BIOS will not be
changed to the Backup BIOS.
GA-8PE667 Ultra/Pro Motherboard
Dual BIOS / Q-Flash Utility V845.4MF3
(C) 2001, GIGA-BYTE Technology Co., LTD.
- 7 0 -
:Disabled
:Disabled
:Enabled
:Main BIOS
:Main to Backup
F5:Start BIOS Recovery
F9:Exit Without Saving
F10:Recovery from Disk