Gigabyte GA-8I875 User Manual page 50

On-Chip Primary PCI IDE On-Chip Primary PCI IDE
On-Chip Primary PCI IDE
On-Chip Primary PCI IDE On-Chip Primary PCI IDE
Enabled
Disabled
On-Chip Secondary PCI IDE
Enabled
Disabled
On-chip SA On-chip SA T T T T A A A A
On-chip SA T A
On-chip SA On-chip SA
Disabled
Auto
Manual
SA SA T T T T A A A A P o r P o r t0 Configur t0 Configur
SA T A P o r t0 Configur
SA SA P o r P o r t0 Configur t0 Configur
IDE Pri. Master
IDE Pri. Slave
IDE Sec. Master
IDE Sec. Slave
SATA Port0
SATA Port1
SATA Port1 Configure as
The values depend on SATA Port0.
SATA RAID Function
Enabled
Disabled
GA-8I875 / GA-8IK1100 Motherboard
Enable onboard 1st channel IDE port. (Default value)
Disable onboard 1st channel IDE port.
Enable onboard 2nd channel IDE port. (Default value)
Disable onboard 2nd channel IDE port.
Disable SATA controller.
When there is no device to be plugged in IDE1 or IDE2, SATA controller will
remap to IDE controller. (Default Value)
Set SATA Mode manually.
e a s e a s
e a s
e a s e a s
Remap SATA Port 0 to IDE Pri. Master.
Remap SATA Port 0 to IDE Pri. Slave.
Remap SATA Port 0 to IDE Sec. Master.
Remap SATA Port 0 to IDE Sec. Slave.
SATA controller set to SATA port0. As this mode, it support by WinXP or
later OS only. (Default value)
SATA controller set to SATA port1. As this mode, it support by WinXP or
later OS only.
Enable SATA Raid function when SATA Mode set to SATA Port 0 & SATA
Port 1 only. (Default value)
Disable SATA Raid function.
- 46 -