Table of Contents
Advertisement
SATA Port1 configure as
The setting depends on "SATA Port0 configure as" item setting. (Default: SATA Port1)
USB Controller
Enabled
Enable USB controller. (Default value)
Disabled
Disable USB controller.
USB 2.0 Controller
You can disable this function if you are not using onboard USB 2.0 feature.
Enabled
Enable USB 2.0 controller. (Default value)
Disabled
Disable USB 2.0 controller.
USB Keyboard Support
Enabled
Enable USB keyboard support.
Disabled
Disable USB keyboard support. (Default value)
USB Mouse Support
Enabled
Enable USB mouse support.
Disabled
Disable USB mouse support. (Default value)
AC97 Audio
Auto
Auto detect AC97 audio function. (Default value)
Disabled
Disable AC97 audio function.
Onboard H/W LAN
Enabled
Enable onboard H/W LAN function. (Default value)
Disabled
Disable this function.
POWER ON Function
Disabled
Disable this function. (Default value)
Any KEY
Press any key to power on the system.
Mouse
Double click on mouse left button to power on the system.
Mouse/Any KEY
Press any key or double click on mouse left button to power on the system.
Onboard Serial Port 1
Auto
BIOS will automatically setup the port 1 address.
3F8/IRQ4
Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default value)
2F8/IRQ3
Enable onboard Serial port 1 and address is 2F8/IRQ3.
3E8/IRQ4
Enable onboard Serial port 1 and address is 3E8/IRQ4.
2E8/IRQ3
Enable onboard Serial port 1 and address is 2E8/IRQ3.
Disabled
Disable onboard Serial port 1.
Onboard Parallel port
Disabled
Disable onboard LPT port.
378/IRQ7
Enable onboard LPT port and address is 378/IRQ7. (Default value)
278/IRQ5
Enable onboard LPT port and address is 278/IRQ5.
3BC/IRQ7
Enable onboard LPT port and address is 3BC/IRQ7.
- 35 -
BIOS Setup
Advertisement
Table of Contents
