5) IDE1 / IDE2 (IDE1 / IDE2 Connector)
Important Notice:
Please connect first hard disk to IDE1 and connect CD-ROM to IDE2.
The red stripe of the ribbon cable must be the same side with the Pin1.
6) PWR_LED
PWR_LED is connect with the system power indicator to indicate whether the system is on/off.
It will blink when the system enters suspend mode. If you use dual color LED, power LED will turn to
another color.
40
2
IDE1
Pin No.
1
- 23 -
39
1
IDE2
Definition
1
MPD+
2
MPD-
3
MPD-
Hardware Installation Process