Table of Contents
Advertisement
Serial ATA RAID Quick User' s Guide
Next, you can click "Ok" button to restart the windows and start the
operation "Split boot OS into Raid0". Or click "Cancel" button to
suspend this operation. But, this operation is still done after
restarting the windows next time.
c) To create a RAID 1 (Mirror) array, follow these steps:
1. "Configuration" ¡÷ "Create Raid" ¡÷ "Raid Type" ¡÷ RAID 1.
2. From the drop-down box "Mode Type", select the mode type you
want.
3. From the "Available Disks" pane, select the disk and click downward
arrow icon or double click it to add the disk on the "Selected Disks"
pane.
The RAID1 array supports two hard disks only.
NOTE:
4. When the RAID1 array' s configuration is finished, click the button
"Create". Then a "Create Mirror RaidSet" dialog will be popup.
31
Advertisement
Table of Contents
