Table of Contents
Advertisement
Serial ATA RAID Quick User' s Guide
5. Next, another message box will be popup to tell user that disk setting
has been changed and ask whether to restart the computer or not.
Click "Yes" button to restart the computer or click "Cancel" button to
skip restarting.
New Setting will take effect after restarting only.
NOTE:
b) To create a RAID 0 (Stripe) array, follow these steps:
1. "Configuration" ¡÷ "Create Raid" ¡÷ "Raid Type" ¡÷ RAID 0.
2. From the drop-down box "Block Size", select the block size you want.
3. From the drop-down box "Mode Type", select the mode type you
want.
4. From the "Available Disks" pane, select the disk and click downward
arrow icon or double click it to add the disk on the "Selected Disks"
pane.
28
Advertisement
Table of Contents
