Gigabyte W511 Series User Manual page 45

• System Memory
This field reports the amount of base (or conventional) memory found
by the BIOS during Power-On Self-Test (POST).
• Extended Memory
This field reports the amount of extended memory found by the BIOS
during Power-On Self-Test (POST).
• Video Memory
Lets you specify the shared memory pre-allocated for frame buffer as
128MB.
• Legacy USB Support
Enable or disable the support of USB 2.0.
• Network Support
Enable or disable network support.
Security Setup Menu
Phoenix BIOS Setup Utility
Info Main
Supervisor Password Is: Clear
User Password Is: Clear
Set Supervisor Password: [Enter]
Set User Password: [Enter]
Set HDD Password: [Enter]
Password on boot: [Disabled]
F1 Help   Select Item -/+
ESC Exit – Select Menu Enter
• Supervisor Password Is
Shows that your notebook computer is under controlled by Supervisor
Password or not.
• User Password Is
Shows that your notebook computer is under controlled by User Pass-
word or not.
• Set Supervisor Password
Supervisor password gives you the authority in accessing the setup
utility. You also need to enter this password in system booting and
resuming from suspend mode. When you press <Enter> in this field,
the Set Supervisor Password dialog box appears. Enter a new pass-
W511 Series User's Manual
Security Boot Exit
Item Specific Help
Supervisor
Password controls
access to the setup
utility.
Change Values F9 Setup Defaults
Select F10 Save and Ext
Sub-menu
36