Connecting To A Satellite Dish - Gateway 205 User Manual

Connecting to a satellite dish

To connect the projector to a satellite dish:
1
Plug the component cable connector into the PC/HD port on the back of
the projector, then plug the green, blue, and red connectors on the other
end into the corresponding ports on the back of the satellite dish receiver.
2
Plug the red and white connectors from a composite video cable into the
corresponding ports on the back of the satellite dish receiver, then plug
the red and white connectors on the other end to the corresponding ports
on an audio receiver.
www.gateway.com
Connecting components
21