The Back Panel; Installation Environment - TP-Link TD-W8101G User Manual

2.2 The Back Panel

POWER: The Power plug is where you will connect the power adapter.
RESET: There are two ways to reset the Router's factory defaults.
Method one: Press the reset button of the Router; keep the reset button pressed down for
more than five seconds.
Method two: Restore the default setting from "Maintenance-SysRestart" of the Router's
Web-based Utility.
LAN: Through the port, you can connect the Router to your PC or the other Ethernet network
devices.
LINE: Through the port, you can connect the router with the telephone. Or you can connect
them by an external separate splitter. For details, please refer to 2.4.
Antenna: Used for wireless operation and data transmit.
Note:
There is an additional printed antenna with 0 dBi gain. Without external antenna, you can also
connect the Router to your PC or the other Ethernet network devices by close quarters.

2.3 Installation Environment

The Product should not be located where it will be exposed to moisture or excessive heat.
Place the Router in a location where it can be connected to the various devices as well as to a
power source.
Make sure the cables and power cord are placed safely out of the way so they do not create a
tripping hazard.
The Router can be placed on a shelf or desktop.
Keep away from the strong electromagnetic radiation and the device of electromagnetic
sensitive.
TD-W8101G 54M Wireless ADSL2+ Router User Guide
Figure 2-2
5