Table of Contents
Advertisement
TD-W8951ND
QSS Settings: QSS can help you to add a new wireless device to an existing network quickly.
This section will guide you how to use QSS function.
•
QSS state: Display the current QSS state.
•
QSS mode: If the wireless adapter supports Wi-Fi Protected Setup (QSS), you can
establish a wireless connection between wireless adapter and Router using either Push
Button Configuration (PBC) method or PIN method, please select the one you want.
•
QSS progress: Show the current QSS progress.
•
Reset to OOB: Use this button to reset the QSS state to "unconfigured", so that a new
key will be created when using QSS function next time.
1)
PBC
If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration
(PBC) method, you can add it to the network by PBC with the following two methods. Click
PBC, you will see the screen as shown below.
Method One:
Step 1: Press the QSS button on the front panel of the Router or click Start QSS button in
Figure 4-21.
Step 2: Press and hold the QSS button of the adapter directly for 2 or 3 seconds.
150Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-20
Figure 4-21
35
Advertisement
Table of Contents
