Example #5: Logging Port Configuration - NETGEAR GSM7248NA Administration Manual

Example #5: logging port configuration

(Netgear Switch Routing)
(Netgear Switch Routing) (Config)#logging ?
buffered
cli-command
console
host
syslog
(Netgear Switch Routing) (Config)#logging host ?
<hostaddress>
reconfigure
remove
(Netgear Switch Routing) (Config)#logging host 192.168.21.253 ?
<cr> Press Enter to execute the command.
<port> Enter Port Id
(Netgear Switch Routing) (Config)#logging host 192.168.21.253 4 ?
<cr> Press Enter to execute the command.
<severitylevel> Enter Logging Severity Level (emergency|0, alert|1,
critical|2, error|3, warning|4, notice|5, info|6, debug|7).
(Netgear Switch Routing) (Config)#logging host 192.168.21.253 4 1 ?
<cr> Press Enter to execute the command.
(Netgear Switch Routing) (Config)#logging host 192.168.21.253 4 1
(Netgear Switch Routing) #show logging hosts
Index IP Address
----- -----------------
1 192.168.21.253
Syslog
NETGEAR 7000 Series Managed Switch Administration Guide Version 6.0
#config
Buffered (In-Memory) Logging Configuration.
CLI Command Logging Configuration.
Console Logging Configuration.
Enter IP Address for Logging Host
Syslog Configuration.
Enter Logging Host IP Address
Logging Host Reconfiguration
Logging Host Removal
Severity
----------
alert
v1.0, Jan 2007
Port Status
---- -------------
4 Active
21-5