Installation Check List; Air Intake - Pelpro FPP, IPP Owner's Manual

I
NSTALLATION
Unless you are knowledgeable and experienced in stove installation, we recommend your PELPRO stove
receive a Pre-delivery Check and be installed by your local Specialty Retailer or Certified HVAC Service
Depot.
COMPLETE THIS CHECK LIST PRIOR TO LIGHTING YOUR FIRST FIRE:
_____ Carefully read this "Owner's Manual". SAVE THIS MANUAL.
_____ Obtain final inspection and approval by local building officials.
_____ Carefully clean all marks off the brass parts before the first fire is lit. Use a soft cloth and a gentle type
cleaner. Caution: Never use an abrasive cleaner on any part of your stove.
_____ Polish the hopper to remove the oil type coating used in manufacturing.
_____ Have your local Dealer demonstrate all the operational, cleaning and maintenance steps necessary
for your stove.
_____ Sign and keep a copy of the Pre-delivery Check List supplied by your Authorized Pelpro Dealer,
"Dansons Certified Installer", found inside our appliance or available online.
Register online at
______ Register your purchase online at www.dansons.com/support.
_____ Fill the hopper with quality pellets to prime the unit; Using the CCI "AcuTron", (figure 5), PUSH the
FEED RATE Touch Pad and this will start the auger and the combustion fan.
NOTE: Do not attempt to light a fire at this time. Leave the START / FEED RATE [ON] for 2 to 5 minutes until
pellets start dropping into the burn grate. Then touch the OFF pad to turn off system . The auger is now primed to
deliver fuel to the burn grate (figure 6). Then light the stove according to the directions outlined in "LIGHTING
YOUR STOVE",
CCI –"AcuTron Board"
Figure 3
Can
adian Comfort Industries
Copyright 2004
www.dansons.com/support
Heat Tubes
Tube Scraper
Window
Burn Grate
Burn Pot
E Z Clean
Grate
V04
www.pelprostoves.com
C
HECK
for Extended Warranty.
Cutaway View
9
L
IST
Hopper
Auger
Auger Motor
Fan Motors
Exhaust

Air Intake

Ash Pan
Figure 4
PELPRO OWNERS MANUAL
Dansons Group Inc.