Specifications - JBL CINEMA 500 Quick Start Manual

SPECIFICATIONS

CINEMA 500 SYSTEM
Frequency response:
CINEMA 500 SATELLITE SPEAKERS
Low-frequency transducer:
High-frequency transducer:
Recommended amplifier power:
Nominal impedance:
Sensitivity (2.83V/1m):
Crossover frequency:
Enclosure type:
Connector type:
Dimensions (H x W x D):
Weight:
SUB140P SUBWOOFER
Low-frequency transducer:
Enclosure type:
Amplifier power:
Frequency response:
Audio controls:
Connections:
Power requirement:
Power consumption:
Dimensions (W x H x D):
Weight:
HARMAN Consumer, Inc.
8500 Balboa Boulevard, Northridge, CA 91329 USA
© 2010 HARMAN International Industries, Incorporated. All rights reserved.
JBL is a trademark of HARMAN International Industries, Incorporated, registered in the United States
and/or other countries. PolyPlas is a trademark of HARMAN International Industries, Incorporated.
Features, specifications and appearance are subject to change without notice.
Part No. 950-0298-001 Rev. A
32Hz – 20kHz (–6dB)
Two 3" (75mm) PolyPlas cone, video-shielded
™
1" (25mm) titanium-laminate dome,
video-shielded
100 watts
8 ohms
86dB
3.7kHz
Sealed
Push-spring terminal
11-3/8" x 4-3/4" x 3-3/8"
(289mm x 121mm x 86mm)
3.2 lb (1.45kg)
8" (200mm) cone (down-firing)
Ported (down-firing)
150 watts
32Hz – 150Hz (–6dB)
Volume level, phase, crossover frequency
LFE input, left and right RCA line-level
inputs
120V/60Hz, 150W (US);
220V – 240V/50Hz, 150W (EU)
<1W (8mA@120V) standby;
300w (2.5A@120V) peak
19" x 14" x 14"
(483mm x 355mm x 355mm)
22 lb (10kg)
CINEMA 500 CENTER SPEAKER
Low-frequency transducer:
High-frequency transducer:
Recommended power handling:
Nominal impedance:
Sensitivity (2.83V/1m):
Crossover frequency:
Enclosure type:
Connector type:
Dimensions (H x W x D):
Weight:
Two 3" (75mm) PolyPlas cones,
video-shielded
1" (25mm) titanium-laminate dome,
video-shielded
100 watts
8 ohms
89dB
3.7kHz
Sealed
Push-spring terminal
4-7/8" x 12" x 3-3/8"
(124mm x 305mm x 86mm)
3.2 lb (1.45kg)
www.jbl.com